LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson, shown with hex screws—perfect for custom switch housings or blanking plates.
LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson, shown with hex screws—perfect for custom switch housings or blanking plates.
LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson, shown with hex screws—perfect for custom switch housings or blanking plates.
LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson, shown with hex screws—perfect for custom switch housings or blanking plates.
LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson, shown with hex screws—perfect for custom switch housings or blanking plates.
LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson, shown with hex screws—perfect for custom switch housings or blanking plates.
LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson, shown with hex screws—perfect for custom switch housings or blanking plates.
LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson, shown with hex screws—perfect for custom switch housings or blanking plates.

LC Fabrications Gen 2 Clamshell Panels With Integrated Microswitches for 1982-2013 Harley-Davidson

Regular price$70.00

SKU: 101-0749

/

Add Grip Glue

5mL tube contains enough glue to affix two grips

Add Grips

  • Low stock - 1 item left
  • Inventory on the way
  • Hassle-free 90 Day Returns
  • Free USA Shipping for Orders Over $99*
  • Free Tech Support M-F 8:30am-4:30pm EST
  • Fast Shipping—No Backorders, No Drop Shipping, No BS

LC Fabrications Gen 2 Blanking Plates With Integrated Switches for 1982-2013 Harley-Davidson

Sometimes in the custom world, less is more.

  • Sold individually
  • Sleeker alternative to factory switch housings without the loss of function
  • Smooth, clean look
  • Machined from 6061 aluminum
  • Powder coated to match
  • Available for 1982-1995- or 1996-2013-type controls
  • Available in single or dual switch configurations
    • Switches are momentary 
    • Bars will require drilling
  • New stainless steel fasteners included
  • Made in USA

These panels allow you to sanitize a set of bars while retaining all the functions and providing a deeply custom look that doesn't stand out as garish.

The two year ranges available closely match the appearance of controls used by Harley-Davidson for a subtle appearance that's cleaner than factory and offers a custom look to sharp-eyed observers.

All part numbers include selected plate, appropriate fasteners, and microswitches.

  • Most 1982-2013 Harley-Davidson
  • Covers designed for OEM handlebar; some aftermarket dimpled units can be deformed near the dimpled area, compromising fit
  • Drilling and slotting handlebars and internal wiring is required for installation
  • 101-0749 Brake Side, Single Microswitch, 1996-2013; replaces B11182
  • 101-0750 Brake Side, Double Microswitch, 1996-2013; replaces B11282
  • 101-0751 Clutch Side, Single Microswitch, 1996-2013; replaces B11183
  • 101-0752 Clutch Side, Double Microswitch, 1996-2013; replaces B11283
  • 101-0753 Brake Side, Single Microswitch, 1982-1995; replaces B11192
  • 101-0754 Brake Side, Double Microswitch, 1982-1995; replaces B11292
  • 101-0755 Clutch Side, Single Microswitch, 1982-1995; replaces B11193
  • 101-0756 Clutch Side, Double Microswitch, 1982-1995; replaces B11293

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

California: ⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov